Publisher: York Audio
Website: yorkaudio.co
Format: KIPR, WAV
Quality: 24 bit 96, 48, 44.1 kHz mono
Description: York Audio VX30 212 BLUE Cab Pack is based on the VOX™ AC30/6 TB with original 1994 Celestion™ Alnico Blue speakers. This was my personal amp that I used on tour with Paramore and I’m thrilled to offer it a true boost, a testimonial from one of my favorite amps. Although the red appearance is rare (only 36 in the world), the tone of this amp is all classic VOX™. The tone is surprisingly warm, with lush low-mids and just the right amount of the trademark squareness these amps are known for. High frequencies sound with great clarity without being abrasive, even on guitars equipped with a single-coil pickup.
Content :
852 WAV
150 KIPR
Microphones used in this Cab Pack
Dynamic:
57m – Based on a modern Shure® SM57
57v – Based on a vintage Shure® Unidyne III SM57 58 – Based on a Shure® SM58
SM7 – Based on a Shure® SM7b
421 – Based on a vintage Sennheiser® MD421 906 – Based on a Sennheiser® e906
i5 – Based on an Audix® i5
Ribbon:
121- Based on a Royer® R-121
160 – Based on a Beyerdynamic® M160
313 – Based on a Shure® KSM313
4119 – Based on a vintage STC® (Coles®) 4119
Condenser:
E22 – Based on a Josephson® e22S small diaphragm condenser mic
U47 – Based on a Telefunken® U47 large diaphragm tube condenser mic
Ambient:
ROOM 1 and 2 – Captured with a Telefunken® U47
REAR 1 and 2 – Captured with a Telefunken® U47
SIDE – Captured with a Telefunken® U47
Additional Information :
The York Audio VX30 212 BLUE Cab Pack is based on a Vox™ AC30/6 TB loaded with the original Celestion™ Alnico Blue speakers from 1994. This was my personal amp I used on tour with Paramore and I’m thrilled to offer faithful impulse responses of one of my favorite amps. While the red exterior is rare (only 36 in the world), the tone of this amp is classic Vox™ all the way. The tone is surprisingly warm with lush low-mids and just the right amount of the signature “boxiness” these amps are known for. The top end chimes with great clarity without being abrasive even with single coil pickup equipped guitars.
This pack offers 134 single mic captures between 13 mics along with 16 of York Audio’s famous multi-mic mixes. Also included in this pack are two custom signature mixes. Mix BMAY was designed to replicate tones from one of the world’s most “royal” players, and Mix EDGY was designed to replicate tones that “YOU TOO” will enjoy playing.
This cab excels at a broad range of styles such as jangly Brit Pop, ambient P&W, twangy Country, gritty Indie Rock, and a multitude of classic sounds we’ve come to know and love over the years.
Microphones used in this Cab Pack
Dynamic:
57m – Based on a modern Shure® SM57
57v – Based on a vintage Shure® Unidyne III SM57 58 – Based on a Shure® SM58
SM7 – Based on a Shure® SM7b
421 – Based on a vintage Sennheiser® MD421 906 – Based on a Sennheiser® e906
i5 – Based on an Audix® i5
Ribbon:
121- Based on a Royer® R-121
160 – Based on a Beyerdynamic® M160
313 – Based on a Shure® KSM313
4119 – Based on a vintage STC® (Coles®) 4119
Condenser:
E22 – Based on a Josephson® e22S small diaphragm condenser mic
U47 – Based on a Telefunken® U47 large diaphragm tube condenser mic
Ambient:
ROOM 1 and 2 – Captured with a Telefunken® U47
REAR 1 and 2 – Captured with a Telefunken® U47
SIDE – Captured with a Telefunken® U47
All products have been tested with Fractal Audio Systems™, Line 6™, Strymon™, and Kemper™ hardware, as well as DAW plug-ins to ensure seamless integration with your digital modeling units.
York Audio products are licensed, not owned. It is illegal to share York Audio products, so please support our brand and ensure more great content by purchasing your desired products. All sales are final, as there are no refunds on digital goods.
All Cab Packs come in .WAV format in 24-bit 96k, 48k, and 44.1k files.
All IRs are 500ms for maximum resolution. Hardware units that require shorter files will automatically truncate 500ms files to the unit’s preferred length upon import.
Raw and MPT versions are provided.
Fractal Audio™, Line 6™ Helix, Atomic™ Amplifire, and most IR loading amp modelers utilize 48k files.
Kemper™ units ulitize 44.1k files.
Strymon™ Iridium and BOSS™ units utilizes 96k files.
