13.9.2018 Distribution updated. Added version x32, Mac
Year / Release Date : 12.9.2018
Version : 2.6
Developer : Tone2
Developer site : www.tone2.com/electra2.html
Format : VSTi / AU
Digit capacity : 32 / 64bit
Tabletka : License File
System Requirements :
Windows XP / 7/8/10
Mac OSX 10.5 or higher
Description : Tone2’s ElectraX is an excellent all-in-one synthesizer plugin, so we are pleased to announce that its Electra2 successor has been announced. He lost the “X”, but got a lot of new features.
Installation:
Install plugin
Copy the file Electra2.t2k to the folder where you installed the program.
—
Where did you installed Electra v2.6.
If you have another version of Electra already installed, install THIS version to a different folder.
After the installation of the VST, it is necessary to go!
Make sure your DAW is scanning for the folder where you installed it.
Electra v.2.6 If you have another instance of Electra already installed on your computer.
Copy the file Electra2.t2k to the folder where you installed the program.
—
Where did you installed Electra v2.6.
If you have another version of Electra already installed, install THIS version to a different folder.
After the installation of the VST, it is necessary to go!
Make sure your DAW is scanning for the folder where you installed it.
Electra v.2.6 If you have another instance of Electra already installed on your computer.
What’s new:
New synthesis mode: Analog oscillators (Saw, Square, Triangle, Sine, Half Sine, Comb, Pulse 25%).
New synthesis mode: Soft sync (is active if the target oscillator is analog; works well with triangle).
New synthesis mode: Analog pulse width modulation (select Analog -> ‘Pulse PW’; PW knob controls the pulse width).
New effect: ‘Gated Reverb’ which syncs the BPM rate.
New effect: ‘Gated Reverb Echo’ is a Gated Reverb with a delay which syncs to BPM.
New effect: ‘Reverse Reverb’ which syncs to the BPM rate.
New effect: ‘Stereo Width’ allows you to spread the panorama from mono to surround.
New effect: ‘Laser Punch’ adds additional punch. Use it with a sawtooth to gereate a zzapping ‘Rubber Bass’ sound.
New effect: ‘Stereo flanger’.
New effect: ‘Surround pan’ with dolby prologic compatible surround encoding.
New filter: ‘LP Butter’ is an analog modeled butterworth filter with 24dB. The analog knob controls the noisyness.
New filter: ‘LP Tone2’ is an analog modeled leapfrog filter with 24dB. The analog knob controls non-linearity.
New filter: ‘LP Elliptic’ is a digital filter with 40dB slope.
The patch browser shows a scrollbar if more than 26 categories exist.
Doubleclick on a knob resets it to the default value.
Custom Wave -> ‘Load wave’ now shows a popup menu with all available waveforms in ElectraX_wavetables.
Custom waveforms can quickly be selected with the mouswheel.
Custom Wave -> ‘Random wave’ generates a random waveform.
‘Save Wave’ exports a wav file with the oscillator’s waveform.
New Sample effect: ‘Phase shifter’ creates a very similar sounding sample. It can be used for sample clearing, since it is difficult to use.
New halftone mode for the arpeggiator: 3/4.
‘Natural scrolling’ support for the mousewheel on Mac.
List selectors now have checkmarks.
40 additional patches.
Enhanced sound of ‘Reverb Hall’, especially for small sizes.
Enhanced sound of ‘Reverb Room’ for small sizes.
Enhanced sound of ‘Reverb Cathedral’.
Slightly enhanced sound of ‘Reverb Big’ with reduced low frequency rumble.
Slightly enhanced sound of ‘Reverb Infinity’ with reduced low frequency rumble.
A hand symbol is shown for text-style parameters.
More detailed description for some tooltips.
Knobs are also hidden.
Better default settings for Chorus.
Better default settings for Ensemble.
Mousewheel on PC has a more aggressive focus.
No more clipping in the waveform displays.
More clean sound of PWM modulation on ‘custom wave’.
Filter frequency response display is more precise.
LFO at high frequencies
More linear frequency response of ‘Dynamic loud’, ‘Bright’ and ‘Loudness’.
Init -> ‘Reset All’ sets Pitchwheel to + -12.
Cleaned up some tooltips.
Several small enhancements.
More smooth looking waveform displays.
Reworked some ‘init patch’ templates.
Fixed: The timing in the 44kHz and 48kHz samplerate was incorrect.
Fixed: I’ve got some PC hosts.
Fixed: LFO ‘Fade’ didn’t work with some waveforms.
Fixed: The checkmark ‘Multilayer edit’ was not shown after the GUI.
Fixed: Fixed a denormal in the Reverb effect.
Fixed: it was set to 0.
Fixed: Monophonic arpeggiators sometimes didn’t play if keys were hit while loading a patch.
Fixed: ‘Hold’ time in the envelope section was displayed incorrectly.
Fixed: LFO up / down arrow on mouseover.
Fixed: STEP Lfo speed display was incorrect.
Fixed: Modulation depth of knobs could have been incorrect if the target was switched.
New synthesis mode: Soft sync (is active if the target oscillator is analog; works well with triangle).
New synthesis mode: Analog pulse width modulation (select Analog -> ‘Pulse PW’; PW knob controls the pulse width).
New effect: ‘Gated Reverb’ which syncs the BPM rate.
New effect: ‘Gated Reverb Echo’ is a Gated Reverb with a delay which syncs to BPM.
New effect: ‘Reverse Reverb’ which syncs to the BPM rate.
New effect: ‘Stereo Width’ allows you to spread the panorama from mono to surround.
New effect: ‘Laser Punch’ adds additional punch. Use it with a sawtooth to gereate a zzapping ‘Rubber Bass’ sound.
New effect: ‘Stereo flanger’.
New effect: ‘Surround pan’ with dolby prologic compatible surround encoding.
New filter: ‘LP Butter’ is an analog modeled butterworth filter with 24dB. The analog knob controls the noisyness.
New filter: ‘LP Tone2’ is an analog modeled leapfrog filter with 24dB. The analog knob controls non-linearity.
New filter: ‘LP Elliptic’ is a digital filter with 40dB slope.
The patch browser shows a scrollbar if more than 26 categories exist.
Doubleclick on a knob resets it to the default value.
Custom Wave -> ‘Load wave’ now shows a popup menu with all available waveforms in ElectraX_wavetables.
Custom waveforms can quickly be selected with the mouswheel.
Custom Wave -> ‘Random wave’ generates a random waveform.
‘Save Wave’ exports a wav file with the oscillator’s waveform.
New Sample effect: ‘Phase shifter’ creates a very similar sounding sample. It can be used for sample clearing, since it is difficult to use.
New halftone mode for the arpeggiator: 3/4.
‘Natural scrolling’ support for the mousewheel on Mac.
List selectors now have checkmarks.
40 additional patches.
Enhanced sound of ‘Reverb Hall’, especially for small sizes.
Enhanced sound of ‘Reverb Room’ for small sizes.
Enhanced sound of ‘Reverb Cathedral’.
Slightly enhanced sound of ‘Reverb Big’ with reduced low frequency rumble.
Slightly enhanced sound of ‘Reverb Infinity’ with reduced low frequency rumble.
A hand symbol is shown for text-style parameters.
More detailed description for some tooltips.
Knobs are also hidden.
Better default settings for Chorus.
Better default settings for Ensemble.
Mousewheel on PC has a more aggressive focus.
No more clipping in the waveform displays.
More clean sound of PWM modulation on ‘custom wave’.
Filter frequency response display is more precise.
LFO at high frequencies
More linear frequency response of ‘Dynamic loud’, ‘Bright’ and ‘Loudness’.
Init -> ‘Reset All’ sets Pitchwheel to + -12.
Cleaned up some tooltips.
Several small enhancements.
More smooth looking waveform displays.
Reworked some ‘init patch’ templates.
Fixed: The timing in the 44kHz and 48kHz samplerate was incorrect.
Fixed: I’ve got some PC hosts.
Fixed: LFO ‘Fade’ didn’t work with some waveforms.
Fixed: The checkmark ‘Multilayer edit’ was not shown after the GUI.
Fixed: Fixed a denormal in the Reverb effect.
Fixed: it was set to 0.
Fixed: Monophonic arpeggiators sometimes didn’t play if keys were hit while loading a patch.
Fixed: ‘Hold’ time in the envelope section was displayed incorrectly.
Fixed: LFO up / down arrow on mouseover.
Fixed: STEP Lfo speed display was incorrect.
Fixed: Modulation depth of knobs could have been incorrect if the target was switched.
doesnt work it says something about a name being wrong
can’t run installation
Do u have another website with an Electra 2 that works. Thanks
Yeah it says syntax error or some shit. It doesnt work at all. Oh well, Admins do u know how to fix this. Thanks.
Just move the file from the downladed location, the exe file alone, to desktop, and install. Worked for me.
yes its true, it worked for me too when i moved it to the desktop ,…woooow u genius.
wheres the downlaod link