Year/Date of Release: 8.11.2026
Version: 1.0.0
Developer: Codwaves
Developer Website: https://codwaves.com/quance/
Format: VST3, AAX
Bit Depth: 64-bit
Crack: Cracked
System Requirements: Windows 10
- 20.8 MB
Description:
Quance analyzes audio, identifies peaks that cause listening fatigue, and reduces them in real-time. The harmonics, transients, and timbre that define your sound remain unchanged.
Every engineer is familiar with this problem: when you remove harshness, you often lose something vital in the mix. Vocals lose clarity, the snare drum loses its crispness—and while the mix may become smoother, it can also end up feeling less powerful.
Quance was designed to solve this. It employs hundreds of self-adjusting spectral filters that intervene only where the spectrum causes issues, and only to the extent necessary. Integrated protection systems work alongside the detector to prevent any cuts that might compromise the sound.
You simply set the desired amount of cleaning using a straightforward control; Quance automatically determines where to apply it, updating its settings every few milliseconds.
Created by Professionals
Quance began with a question: what if engineers helped design a resonance control system? We examined existing tools and decided to make them better. Then, we did what every developer should do: we shared our prototypes with leading sound engineers and producers and asked how we could improve them.
The feedback we received was invaluable. Could this be added? Could that be simplified? Every conversation focused on workflow and efficiency, and each round of feedback contributed to the evolution of the plug-in. Quance is the result.
When we started receiving messages like these from top-tier professionals, we knew we had achieved our goal.
Intelligent Learning: Starting from the Sound Itself
Play the section that’s giving you trouble and click “Learn.” Quance listens, identifies the most prominent, persistent resonances, and focuses on them, matching the width of each band to its corresponding peak. It also narrows the detection range around the problematic area.
Some issues don’t occur all the time. Sibilance might appear only on certain words, while room resonance might be triggered by just a single note. A cymbal might sound harsh during the chorus but not in the verse. Click once to start a continuous, looping analysis—Quance will listen to the problematic passage and let you know once it has been processed. Double-click to initiate a fixed, eight-second analysis pass.
The “Learn” function adapts to the selected mode, ensuring that processing for vocals differs from that for drums. It never alters the “Amount” setting, and the entire operation can be undone in a single step. You can choose to save the result, refine it further, or discard it.
Protecting Timbre and Transients: Cleaning Without Compromising Performance
Tone Protect monitors a voice’s fundamental frequencies, overtones, and formants, preventing them from being attenuated in ways that would be detrimental. When vocals are boosted, vowels retain their original timbre; if you dampen a cello, its core sound remains unchanged.
Transient Protect identifies the attack of a percussive instrument, a consonant, or a string pluck, and attenuates them accordingly. While a broad attack might sometimes resemble a resonance, Quance is able to distinguish between the two. A snare drum retains its snap, and vocals maintain their clarity.
Both functions adapt based on the selected mode: “Drums” mode focuses more on transient protection, while “Vocals” mode prioritizes timbre. If you encounter a pitch-related issue—such as ringing or a “howling” room resonance—simply disable the protection and let Quance handle the problem.
Taming and Protecting: Eight Focus Points, Four Detection Ranges
Automatic detection handles the bulk of the work, while focus points take care of the rest. Double-click on the graph to add a point; raise it to increase detection sensitivity at that frequency, or lower it to “protect” that area from sensitivity-based reduction. You can use up to eight controls simultaneously, each with a customizable width—ranging from a narrow notch to a broad curve.
Before adjusting the “Amount” parameter, set a protection point at the fundamental frequency of your bass. Add a taming point at 6 kHz to address sibilance in vocals. Click the headphone icon on any point to isolate that frequency band, then sweep the slider to pinpoint the resonance by ear.
Detection ranges define where Quance is permitted to operate. You can use up to four ranges at once—for instance, to attenuate the low-mids and high frequencies simultaneously, while leaving the “presence” range untouched. Seven range presets—covering everything from “Sibilance” to “Snare Ring”—are available with a single right-click.
From zero latency to ultra-high resolution: five quality levels
Quance features four distinct processing engines organized into two groups, allowing the plug-in to adapt to your needs rather than the other way around.
The “Studio” tier utilizes a three-band engine with varying resolution levels. Long analysis windows in the low-frequency range capture narrow room modes and bass frequencies, while short windows in the high-frequency range preserve the clarity of transients. “Studio Pro” serves as an efficient, go-to default option. “Studio Ultra” doubles the size of each window, providing the highest frequency resolution that Quance has to offer—ideal for mixing and mastering, provided your DAW handles latency compensation.
The “Live” tier is designed for tracking, monitoring, streaming, and live performance. The “Light” and “Normal” modes provide windowed processing with low latency. The “Zero” mode is unique in that the audio never passes through a Fast Fourier Transform (FFT). Instead, it employs 48 minimum-phase filters along a sample-aligned signal path to minimize latency, resulting in zero reported latency—perfect for singing, monitoring, or live performance.
Switch between modes on the fly, and Quance will transition seamlessly—with no audible clicks or pops.
Automatic Loudness Matching: Evaluating Tone, Not Level
Eliminating resonances often results in a drop in sound level. During quick A/B testing, quieter audio can sound worse—a bias that often leads engineers to second-guess their choices.
Enable “Match,” and Quance will continuously monitor the perceived loudness at both the input and output using psychoacoustic measurements, automatically compensating for any difference. Whether you’re toggling the bypass, comparing A/B snapshots, or auditioning presets, your evaluation becomes objective. All that’s left for you to decide is whether the track actually sounds better.
Use this alongside “Delta,” which plays back only what Quance has removed. Delta reveals exactly what is being taken out, while Match helps you determine whether those changes were the right move.
