Softube – Tube-Tech CL 1B 1.0.3, Metal Amp Room 1.1.5, FET Compressor 1.0.3, Tube Delay 1.0.5, Spring Reverb 1.0.4, Vintage Amp Room 1.0.8, Passive-Active Pack 1.0.2, Acoustic Feedback 1.0.7, Bass Amp Room 1.0.2 (VST) [Win x86]

By | March 9, 2017
Metal Amp Room
Virtual guitar processor for “heavy” styles Metal Amp Room, plug-in format VST and RTAS,
Has two channels, two cabinets, two microphones per cabinet (condenser and dynamic), a programmable gate. In the development of the processor, guitarist Patrik Jensen from the Swedish trash band The Haunted participated, the sound fitted Under his demands. Possible free placement of the microphone, as in the Vintage Amp Room plugin, but in this case There are two microphones with adjustable level balance and stereo panorama. Imitation of room acoustics. Full automation of parameters is supported.
Spring Reverb

Spring Reverb virtual spring reverb, VST and RTAS format plug-in, has a tube amplification simulator with two tone controls, input and output level controls, a balance of the levels of direct and processed signals, the number of pairs of springs (one to three), spring tension, A “shake” regulator for obtaining a corresponding thundering effect.

Vintage Amp Room
The Vintage Amp Room plug-in, previously available only for Pro Tools HD and PowerCore, is available in VST and RTAS formats. The plug-in contains three models of rare guitar amplifiers and cabinets, free microphone placement and full automation of parameters are possible.
Bass Amp Room
The Bass Amp Room plug-in allows you to simulate a variety of bass guitar sounds: from “dirty” fatal to pure “pop”. During the development process, Softube employees pursued two main tasks: first, to achieve the best sound quality; And second, to create an intuitive and fast application. The Bass Amp Room consists of a classic bass amp, three different cabinets with adjustable microphones and a tone control, compression, etc. section. Representatives of the company claim that this is enough to create a unique branded sound and that the main advantage of Bass Amp Room is its simplicity of functionality.
Acoustic Feedback
The VST and RTAS Acoustic Feedback plug-in uses simulation to simulate guitar feedback. There are regulators of the level of feedback and sensitivity. Supports MIDI control. The effect is sensitive to vibrato, suspenders, slides, tremolo, etc.
Tube Delay
Plug-in Tube Delay format VST and RTAS is a combination of a tube preamplifier and a digital delay. The preamplifier has a two-pass passive equalizer and three independent tube stages (for direct signal, delayed and feedback). The delay has the ability to delay from 1 to 1000 ms and synchronize with the pace of the host program.
Tube-Tech CL 1B
Virtual classic compressor Tube-Tech CL 1B Native, plug-in format VST and RTAS.
Softube – FET Compressor
Analog compressor, giving your sound a unique sound
Equlizer
“Passive Equalizer is a 3-band equalizer with incredibly clean and open sound, warm bottoms and clear tops. Active Equalizer with three completely parametric bands and a hard dense sound is an excellent addition to the first. Focusing Equalizer is an additional element that can be used to automatically adjust low, mid and high frequencies depending on the operation of the filters”

6 thoughts on “Softube – Tube-Tech CL 1B 1.0.3, Metal Amp Room 1.1.5, FET Compressor 1.0.3, Tube Delay 1.0.5, Spring Reverb 1.0.4, Vintage Amp Room 1.0.8, Passive-Active Pack 1.0.2, Acoustic Feedback 1.0.7, Bass Amp Room 1.0.2 (VST) [Win x86]

  1. Fil Chabbey

    It prevents Cubase 10.5 from loading. Crashed every time, i had to de-install it.

    Reply

Leave a Reply