Publisher : York Audio
Website : yorkaudio.co
Format : WAV
Quality : 24 bit 96, 48 kHz mono
Description :
The York Audio MRSH 412 MV30-Dual Cab Pack is based on a 1999 Marshall 1960bv 4×12 cabinet with original Celestion G12 Vintage speakers. In search of 1960bv, we listened to four cabinets from different years with different musical journeys. There was something about this office that was instantly inspiring. Normally when we create a package, we choose the speaker with the best sound, but this cabinet had two speakers with completely different sounding and unique sound qualities, which made it almost impossible to choose the best speaker… so instead of choosing just one, we had to use both.
Content :
Microphones used in this Cab Pack
Dynamic:
57m – Based on a modern Shure SM57
57v – Based on a vintage Shure Unidyne III SM57
58 – Based on a Shure SM58
SM7 – Based on a vintage Shure SM7
421m – Based on a modern Sennheiser MD421
421v – Based on a vintage Sennheiser MD421
906 – Based on a Sennheiser e906
Ribbon:
121- Based on a Royer R-121
160 – Based on a Beyerdynamic M160
313 – Based on a Shure KSM313
N22 – Based on an AEA Nuvo N22
Condenser:
U47 – Based on a Telefunken U47 large diaphragm tube microphone
184 – Based on a Neumann KM 184 small diaphragm microphone
Ambient:
ROOM 1, 2, 3, L, and R – Captured with a Telefunken U47
REAR 1 and 2 – Captured with a Telefunken U47
SIDE – Captured with a Telefunken U47
SUM – Captured with a Telefunken U47
All Cab Packs come in .WAV format in 24-bit 96k, 48k, and 44.1k files.
All IRs are 500ms for maximum resolution. Hardware units that require shorter files will automatically truncate 500ms files to the unit’s preferred length upon import.
Natural Phase and Minimum Phase versions are provided.
Fractal Audio™, Line 6™ Helix, Atomic™ Amplifire, and most IR loading amp modelers utilize 48k files.
Kemper™ units ulitize 44.1k files.
Strymon™ Iridium and BOSS™ units utilizes 96k files.
Dynamic:
57m – Based on a modern Shure SM57
57v – Based on a vintage Shure Unidyne III SM57
58 – Based on a Shure SM58
SM7 – Based on a vintage Shure SM7
421m – Based on a modern Sennheiser MD421
421v – Based on a vintage Sennheiser MD421
906 – Based on a Sennheiser e906
Ribbon:
121- Based on a Royer R-121
160 – Based on a Beyerdynamic M160
313 – Based on a Shure KSM313
N22 – Based on an AEA Nuvo N22
Condenser:
U47 – Based on a Telefunken U47 large diaphragm tube microphone
184 – Based on a Neumann KM 184 small diaphragm microphone
Ambient:
ROOM 1, 2, 3, L, and R – Captured with a Telefunken U47
REAR 1 and 2 – Captured with a Telefunken U47
SIDE – Captured with a Telefunken U47
SUM – Captured with a Telefunken U47
All Cab Packs come in .WAV format in 24-bit 96k, 48k, and 44.1k files.
All IRs are 500ms for maximum resolution. Hardware units that require shorter files will automatically truncate 500ms files to the unit’s preferred length upon import.
Natural Phase and Minimum Phase versions are provided.
Fractal Audio™, Line 6™ Helix, Atomic™ Amplifire, and most IR loading amp modelers utilize 48k files.
Kemper™ units ulitize 44.1k files.
Strymon™ Iridium and BOSS™ units utilizes 96k files.
